hunkaman

hello to all - a bit of a follow up on the graphic removal- thanks to the advice offered - I purchased a "pin stripe" removal eraser from a local auto body paint and supply store. the price was $12.00 plus an drill adapter for another two dollars. the eraser worked well, although I am sure it would have performed much better had there been no paint OVER the graphics. the instructions tell you not to exceed 4000 rpm, this is stamped on the eraser wheel as well.  problem is , I own several drills, and even the electric one that I can reduce the rpm , is still above the recommended 4000 rpm, so I used my deWalt 14.4 rechargeable. obviously takes a lot longer, but I was very pleased with the results. as advertised the eraser does not affect the underlying finish. I have decided to not replace the graphic on the doors of the cab, as the underlying paint can be buffed out and looks very nice. the coach is a different story: the crack lines from the vinyl actually telegraphed to the gel coat finish of the coach and left a permanent "STAIN" on the coach body. it is not residue, but an actual stain. after erasing, and cleaning with goo gone product, the area is as smooth as can be but the crack imprints are visible, soo, the new graphics will be reapplied and therefore cover the stain marks, and of course greatly enhance the overall look of the rig. I have taken a photo history of this project and will post it when done in the hope that anyone out there can benefit from my project. thanks to all the advice/comments, I really appreciate  it.  joe.