sdboltdude

I used an 8 inch knife to cut my foam worked great and bed is comfy.

in California my 1987 is $79 a year still worth every penny

I had a mixer but just stirred into forms was a real ez job

I've been away from site for sometime just got married moved to wife's house finally got sometime to work on some projects Made 4 2x2ft cement slabs to park rv on in back yard Scrapped off old roof caulk and resealed vents and seams replaced old toilet to a dometic 300 (picked up new for $50). Old one would not hold water & fill up tank if I had water in rv.. now time to go camping!!!!

looks like a steal of a deal just no pics of inside http://sandiego.craigslist.org/csd/rvs/4931202245.html

thanks Wme looks like good stuff

looking to seal roof I have a couple of leaks on rear seam took off old sealant and want to reseal whole roof looking at dicor 2 step epdm sealant I have a metal roof is this what I need or what do you guys think or have done ty Steve

http://www.chukchansigold.com/ perfect place to stop for the night free RV parking don't even have to register at front desk just pull in to gravel lot back of parking lot all other hotels $130 ort night

I did a valve adjustment today only had to tighten #3 exhaust all others where pretty close to specs also replaced fuel injectors last week.. RV is running better after tune-up All ready for trip to Yosemite leave Saturday for a week..

I'm going to adjust valves to & will be using a mpg app on phone.. I will report back... Off to Yosemite on Saturday from San Diego going to have four people and food lots of beer firewood & camping gear so might be a little heavy should still get better then my last 13 to 13.5 going 65mph & going to lower speed to sweet spot 55 and see how much that helps

installed a 75watt solar panel & a new solar regulator my old solar panel was a 15watt peace of junk I got burned on craigslist with I get 3amps out of 75watts should be all I need to charge battery & run a stereo & charge mp3 player & charge phone

Bought new oem fuel injectors from ebay for a 22re"c" engine my brother/mechanic wanted to teach me how replace injectors... all went well till we found out I bought the wrong injectors so took off efi for second time & found the right injectors reinstalled efi & broke off a bolt on the cold start ?injector? tried to drill & use extractor no luck but bolt drilled out and fell into intake so once again had to take efi off to get to bolt... finally got everything back together and RV is running great and new injectors helped out a lot brother asked what did I learn (meaning not to over tighten bolts) I said pay him to do it

I have 22re 4 banger

my engine is running good & I was going to adjust valves for maintenance reasons only & bought gasket kit talking to mechanic & Toyota Nation forum I decided not to do job because engine is running good at 72000 miles and don't want to have any problems after job from bad valve adjustment or just tightening valves to much.... Should I do the job? or leave it alone because its running smooth..... let me know what you guys think..

kept my on rear bumper storage area & left it their all year and it started chipping away from sun lucky it was on top of container so no leak... guess I should remove when not using going to buy a 5 gallon so it will be carried on roof or cargo rack....

looks good for $$$ 83xxx miles http://sandiego.craigslist.org/csd/rvs/4673059384.html

I was messing around with old camera & power it off running lights that had a bad & short connection the + wire broke off solder and fell inside rv.. so I took off kitchen cabinet sub wall to get to running light wires to pigtail & fix No-Go it was the running light that was dead center inside of wall separating bathroom & kitchen..No big deal.. Drilled a hole for new wires & spliced into exciting running lights & got me thinking why not have backup camera & all wires tucked away inside cabinet sub-wall for a neater look outside & not running wires & rca video cable all over the place.. So I went to Fry's and bought a backup 170* camera that is flush mounted with rv came with its own drill bit for easy install $45w/tax to go wireless I bought a fm 2.4gh video transmitter & receiver ( http://www.amazon.com/gp/product/B00DOQAGO2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) not blu-tooth fm signal works better//for me// installed transmitter outside of sub-wall for better reception & installed receiver under dash.. works good & better picture than my rca cable... getting ready to paint outside RV so RV skin is rough looking..

good job they look nice!!

I was able to change my order to these just to be safe plus these are flush mount others weren't

The ones I have now do not have reflectors in California not sure of laws

I will update pics hopefully back of rv will be painted asap so it will look nice and clean the price is right at $43 for pair should be an easy install

these are the ones I'm going with http://www.amazon.com/Lights-Truck-trailer-Caravan-Emergency/dp/B00LCSBAQM/ref=pd_sim_sbs_auto_3?ie=UTF8&refRID=05EXVVH4M11PA4TW9AEH

yeah it should not be hard to patch the holes and my options are wide open:)

here is some pics getting ready to paint back of RV and would like screw holes covered up if possible

fan was stopped when I fried mine as soon as I flipped switch fried resistor... good news we cut into rv and installed top portion of fan now waiting for usps to bring my new upgrade kit:) with a reverse switch!