Jump to content

mason

Toyota Advanced Member
  • Posts

    147
  • Joined

  • Last visited

Posts posted by mason

  1. Hi everyone, I have 91 warrior with 45'000 miles , My brake all of a sudden felt half way spongy after I had it for emission test in Jeffy loop. .I bled the rear tires and it felt good and solid but after a few days it becomes half spongy again.  I plan to replace the master cylinder(85$) this weekend. I appreciate if anybody has a similar experience to share . Air gets into the rear brakes somehow..

  2.  
    Hi , I have a 91 V6 warrior. Before every time I unplugged the house electric the battery 12 v would take over immediately. Gradually the 12 v would came with a hesitation. And now it won't come on except sometimes it comes on by itself . My suspicion is on the red breaker, what is that  for and how to test it. My batteries seem to be good and they are connected to a solar panel. I checked the ground connection on the battery and it is okay. I also have another question to ask . The fan makes a lot of noise when hooked to house electric. Can I find the fan anywhere online to replace it? I have added a picture of the fuse panel.
    Thank you very much.
     

     

    20200831_160647.jpg

  3. People in this website has given me the potential to be able to keep my old RV in in one piece. Economically I am way below the poverty line. That doesn't mean that I  self-pity myself. Thank you all in these hard times..you are very beautiful people..please take care of yourselves physically  in these hard times my friends ..

  4. 9 minutes ago, Maineah said:

    Facing the engine it turns clockwise so prop your tools against the drive side. You may want to pull the coil wire it's no big deal if it starts the whole mess will just fall on the floor but it's worth the effort. It may take a couple of hits so don't get discouraged. An impact is more than 

    Thanks, I should get on with it in couple of days. 

  5. Hello friends, I am trying to change my timing belt and I have a few questions that I need to ask you . The first question is with regard to loosening of the crankshaft pulley bolt . There is a video on YouTube on timing belt for  4Runner 93 . The guy uses the starter to loosen the bolt. The manual says remove the starter and use a pry bar to hold the  crankshaft from turning and then you can undo the bolt .  Do I have to  torque it to 180 pound or just an impact wrench is enough.  
    Your suggestions are greatly appreciated. .
     

  6. 3 hours ago, jjrbus said:

    Don't know where you are or what the soil conditions are. In Florida when it has not rained in a bit and I need room in the driveway I park my Toy on the lawn with no noticeable issues.  Of course I do not have a Better Homes and Gardens award winning lawn!    Try backing the wheels on the grass a few feet and see what happens, if it sinks or leaves a depression you will only have a small area to repair, it will not hurt the grass itself.   I would not drive over a septic tank if there is one. 

     

    Yes  , I plan on getting one piece of plywood (3/4") and cut it in half so that I have two pieces of 2' by 8' and and do exactly what you said and test it. If okay I buy two more sheets. If not I just move out of Utah to warmer places.

  7. Hello friends, I need to move my 91 toyota motorhome across my friend's well taken lawn in a few days and park it on the grass next to his house.I live in salt lake city ,the temperature now days is going to be 50° high and 35° low with no rain fall in the next few days .  I am thinking to buy 3 plywood sheets and have them to be cut in the middle so I have six 2 by 8 feets . My question is what thickness of plywood or any other composite do I need to use? Thank you very much for the feedback. 

    Best regards, Mason. 

×
×
  • Create New...