Jump to content

Kimbo

Toyota Advanced Member
  • Posts

    41
  • Joined

  • Last visited

1 Follower

About Kimbo

Previous Fields

  • My Toyota Motorhome
    83 Sunrader
  • Location
    Bend Oregon

Recent Profile Visitors

1,170 profile views

Kimbo's Achievements

Newbie

Newbie (1/14)

  1. Trailer is for sale. Located in Bend Oregon. PM me if interested.
  2. Whenever I got to a camp site I would simply unhook it and roll it back into place. Much easier than trying to back it up. It was originally a motorcycle trailer and still has the snap in material to turn it into a camper. Bolting a box onto the back of a Toyota motorhome is OK for some stuff, but don't put too much weight in them. There is no way a box could ever come close to holding what this trailer can. The Sunrader was great for several years but time to move on.
  3. I do not know the origins of the trailer. When I acquired it, I stripped it down to the frame, strengthened the frame, widened the axle, and put new rims and rubber on it. Also replaced the fenders etc, etc. We no longer have our Sunrader, so this trailer may be for sale.
  4. Our 21' Sunrader is great but the problem has always been storage. Where do you put the generator, folding camp table, camp chairs,camp mat, extra water, fuel, firewood ? Struggled with this for several seasons and finally got sick of always loading things into the motorhome itself. I didn't want to build a rear storage box because it would never be large enough for starters, and secondly, the rear chassis is not strong enough to support it. My solution was a fiberglas clam shell motorcycle camp trailer. Tows beautifully, has tons of room, and can also double as an extra sleeping berth if need be. Everything I mentioned fits in there.......even a Honda EU3000i generator. In fact, it stays in there and all I do is disconnect the trailer and roll it 25 feet away from the camper, hook up the cord, and fire it up.
  5. After the bracing the ceiling got recovered with 5.3mm sheeting and then a layer of FRP paneling.
  6. Wanted to put A/C in my 83 21ft. Sunrader but the roof was way too weak. Later models bolted metal braces in place but I didn't like the stove bolt method. Ended up using 1.5x3/4 rectangular tube doubled up (to make a 3x3/4) .120 wall thickness. One was positioned in front of roof vent hole and the other aft. Fiberglassed them in place at each end.
  7. Just finished putting the airbags on my rig. Piece of cake. No need to even take off the rear wheels. About 4 hours. Gotta love that 90 degree drill adapter. I am quite happy with the ride now along with my new leaf spring bushings!
  8. Got the last 4 bushings changed after dropping the black water tank. Out of the 12 bushings all but one were worn all the way through. Rear suspension is quiet and tight now. Air bags work great as well.
  9. Well, replaced the bushings on the passenger side. All 6 were completely worn through......that is to say, metal on metal. Same for the forward one on the drivers side. Can't get at the rear ones on that side until I drop the black water tank, but I can tell from looking at them that they are totally shot as well. Moral of this story.........Check 'em and change 'em. Best $21 spent.
  10. You're right. Using the right angle drill tool made it so easy to drill the 4 vertical holes. Using a tap to make the threads is a good idea, although I didn't have a 3/8NF. The bolts worked quite well and snugged up nice. I had old brackets to cut off as well, which I did with a cutoff disc on a 4 1/2 grinder. I cut 3/4 of the way though them and then snapped them off as I didn't want to nick the frame rails. Did you get a chance to look at your leaf spring and shackle bushings? Just picked up my new set yesterday and noticed that they are now channelled laterally (8 grooves) in the inner bore to help with lube retention. The last set I bought weren't like that but that was back in the eighties!
  11. Those will work. Just installed them on an 87, and they fit my 82 as well. They are available through a variety of places. Including Ebay, Amazon, SuspensionConnection, Jegs , and the list goes on.
  12. Spent a few hours yesterday installing the same airbag kit on a friends Sunrader. Took about 4.5 hours total and everything came apart easily, including the U bolts. Using a 90 degree angle adapter for the drill (Harbor Freight) made drilling the holes for the upper bracket a breeze. The adapter allows you to get in there and drill each hole perfectly. Adapter is 19.99 and worth every penny. No need to remove swaybar or anything else. I'll be doing the same to mine in the near future along with bushing replacement for the rear springs. Mine are totally shot at 60,000 miles. I would venture to guess that most out there are in pretty poor shape. Installation of the airbags will also reduce the load on the new bushings.
  13. The bottom of your rig looks like it has alot more corrosion than mine. I spent a few hours under mine yesterday in preparation for leaf spring bushing replacement and airbags and everything came apart easily. Bought the unit last year from coastal Washington but it must have spent most of its life indoors and off of the winter streets because it is very clean underneath with next to no corrosion. The truck frame is still the OEM black paint. Not bad for a 28 year old Toyota. I understand what you mean though. A job can go sideways fast as soon as things don't cooperate.
  14. I keep a small 12volt vacuum in the Sunrader. Bought it at Big5 sports for $10. Works great. It looks like a tiny shop vac and stores easily because it is so small.
×
×
  • Create New...