Jump to content

WME

Toyota Advanced Member
  • Posts

    5,655
  • Joined

  • Last visited

Posts posted by WME

  1. Simple tricks first.

    Have somebody hold the gas petal to the floor and then squirt some WD-40 on the choke shaft and all the linkage. Wiggle it until it will close on its own.

    If that doesn't work then you will have to start taking things apart. First thing to check is the coil spring in the round thing that the choke shaft goes into.

  2. My wife's CPAP uses a wall wart to provide power for the unit. The mfg offered a 12v cigarette lighter plug as an option, making your own would not be rocket science. The machine discharges my gp 31 battery in 3 days with out charging. The humidifier heater uses most of the power so run the humidity level lower than you would at home.

  3. There was an option on some water heaters called Motoraide it ran engine hot water through a loop in the water heater to give you hot water with out using propane.

    What you need to do is get under your Toy and see where the hose goes. To work properly there have to be 2 hoses , hot out and a cold return.

  4. Rose colored glasses checks. With rocker cover off check the chain guides, you can see them with a flashlight. Dirty old oil can plug the tensioner, resulting in a bad rattle, broken chain guides can do the same (factory guides are plastic.

    With both valves open on a cylinder blow compressed air in spark plug hole, then adjust valves.

    Good luck

×
×
  • Create New...